Engine Oil and Filter Change 

1. After warming up the engine safely situate the vehicle so that you can access the drain bolt and oil filter housing. 
2. Place the drain pan beneath the engine and use the 14mm wrench or socket to remove the drain bolt and let drain.
3. Replace the drain bolt washer with a new one and tighten the drain bolt.
4. Remove the oil filter housing drain cap with the 3/8 extension and then use the provided spout tool to drain the housing by pushing it up into the filter housing.
5. Remove the oil filter housing using the 64 mm oil filter socket.
6. Replace the oil filter along with the 2 O-rings on the filter housing.
7. Reinstall and tighten the filter housing along with the housing drain cap.
8. Pour in the specified amount of oil and then start the engine to circulate and build oil pressure, then shut off.
9. Check for any leaks.
10. Check engine oil level and add oil if necessary.

Maintenance Required Reset

1. Use the arrows of the meter control switches and select Options on the multi-information display.
2. Use the arrows of the meter control switches and select “Vehicle Settings”. Then press "OK".
3. Use the arrows of the meter control switches and select “Scheduled Maintenance”. Then press "OK". 
4. Select “Yes” and press "OK" .

Get Everything You Need In One Box

A Factory Racing Parts Oil Change Kit comes with the oil, filter, crush washer, funnel, and oil change sticker you need to change the oil on your Highlander Hybrid.