Red Line Assembly Lube - 4 oz

• Prepares potential wear surface and prevents metal contact before adequate
  lubrication can be supplied
• Unlike other assembly lubes, Red Line's will not plug filters after initial engine
  start-up
• Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
• Excellent rust and corrosion inhibitor, allows for long-term storage
• For use on camshafts, lifters, pushrods, piston skirts, bolt threads, main and rod
  bearings
• Do not use on exhaust bolts or other high temperature bolts which require an
  anti-seize
• Recommended and used by top camshaft and drivetrain manufacturers

Additional Information

Red Line Assembly Lube is designed to be used as a lubricant to apply to potential wear surfaces before assembly in order to prevent metal contact upon startup before adequate lubrication is supplied. This product will mix with the oil and not plug filters, and can be used on all lubricated parts such as cams, followers, pistons, bearings, and bolt threads. Use only a small amount on bearing and piston surfaces - too much can make it difficult to turn over the engine. Do not use on exhaust bolts or other high temperature bolts which require an anti-seize.

About Red Line Grease and Assembly Lube

• Used by many of the best engine builders, engineers and technicians in Formula 1, GP2, Formula 3, NASCAR, NHRA and WRC

Safety and Product Data Sheets