Toyota Sienna Oil Change Guide

If you are planning on changing the oil in your Toyota Sienna, we've got all of the information you need to get the job done. Below we've got instructions for your Toyota Sienna oil change, all of the service information you'll need, fun facts, and a video to walk you through your Sienna oil change step-by-step.

For more help, we offer motorcycle oil change kits to give you everything you need for your oil change: 6 quarts of 0W-20 synthetic oil, an oil filter, a crush washer, a funnel, and an oil change reminder sticker.

WHAT YOU'LL NEED

• 10W-40 engine oil
• Oil filter
• Oil filter canister drain tool (supplied with new filter)
• Crush washer
• 14mm wrench or 14mm socket, ratchet, 3/8 extension
• Drain pan
• 64mm oil filter wrench or Toyota filter wrench (39564-10944)
• Rags
• Funnel
• High-flash solvent (like brake cleaner, acetone, or paint thinner)

Oil Change Instructions

Engine Oil and Filter Change

1. After warming up the engine safely situate the vehicle so that you can access the drain bolt and oil filter housing.
2. Place the drain pan beneath the engine and use the 14mm wrench or socket to remove the drain bolt and let drain.
3. Replace the drain bolt washer with a new one and tighten the drain bolt.
4. Remove the oil filter housing drain cap with the 3/8 extension and then use the provided spout tool to drain the housing by pushing it up into the filter housing.
5. Remove the oil filter housing using the 64 mm oil filter socket.
6. Replace the oil filter along with the 2 O-rings on the filter housing.
7. Reinstall and tighten the filter housing along with the housing drain cap.
8. Pour in the specified amount of oil and then start the engine to circulate, build oil pressure and then shut off.
9. Check engine oil level and add oil if necessary.

Oil Life Reset

1. While the engine is running, switch the multi-information display to the “Settings” screen.
2. Select “Maintenance Reset” or “Maintenance System” on the “Settings” screen.
3. Select “Yes” on the “Maintenance” screen.
4. “Maintenance Reset Complete” or “Initialization Completed” will be displayed on the multi-information display when the reset procedure has been completed.

SERVICE INFORMATION

• Viscosity: SAE 0W-20 Capacity: 5.5L (5.8 qt) (When filter is removed.)
• Coolant Capacity: 3.2 gal.
• Oil change interval: 10,000 Miles
• Air Filter: 17801-0P051
• Battery Group: 35
• Oil Filter: 045152-YZZA1

APPLICATIONS

• 2017 Toyota Sienna
• 2018 Toyota Sienna
• 2019 Toyota Sienna
• 2020 Toyota Sienna

DID YOU KNOW?

1. Toyota vehicles are so reliable that eighty percent of Toyotas sold 20 years ago are still on the road today.
   
2. Toyota is the world's leading manufacturer of hybrid vehicles with more than 1,700,000 Toyota hybrids currently on the road.