PJ1 5-20 Foam Air Filter Oil Spray 13oz

PJ1 Foam Air Filter Oil Spray protects high performance engines from costly repairs by improving the performance of all types of foam filters. With its New, Super Tacky formulation, sand, grit and other abrasive particles harmful to internal engine parts, are removed from intake air. This improved product is both water repelling and non-settling. Application and Performance: Improved, no waste and easy to use Water repellant and non-settling Improved performance and efficient air flow Filters grit & sand Directions: Clean filter with PJ1 Air Filter Oil Spray and dry filter thoroughly. PJ1 Foam Air Filter Oil spray should be shaken thoroughly and applied liberally to the inner and outer surfaces. Spray at room temperature in an area with adequate ventilation. Do Not Apply At Temperatures Below 70°F (21°C). Gently knead filter while spraying with filter oil. Filter is properly oiled when oil is visible on all surfaces. If clogging develops, remove spray tip with a twisting motion and clean. DO NOT stick pin or other objects into can. Gently replace spray tip with a twisting motion with top of can and spray tip opening pointing away from you. DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. EYE IRRITANT. VAPOR HARMFUL. CONTENTS UNDER PRESSURE. KEEP OUT OF REACH OF CHILDREN  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov